Nordutensili

 | IT |

NU Complete
manual sharpening
machine for drills

SETUP FOR DRILLS WITH RADIUS SPURS

SETUP FOR THROUGH BORE DRILLS

SETUP FOR DOWEL DRILLS

NU COMPLETE MANUAL SHARPENING MACHINE
FOR DRILLS

The NU Manual Sharpening Machine for drills is a re-sharpening machine designed and patented by Nordutensili Srl. Working with sharp drills saves time and money. By re-sharpening the angles of the tool as originally you can get excellent results during processing by reusing the same tool.
Its sharpening system is designed to be able to re-sharpen three types of drills, for this reason the complete version of the machine is called “3×1”. The peculiarity of this machine is the possibility to quickly switch from one configuration to another by changing only the support for the tool and the grinding wheel according to the type of the drill to be re-sharpened.
The manual sharpening machine of Nordutensil Srl can re-sharpen in less than a minute:

  • drills with radius spurs (Laser, Kanefusa, Marathon, Mosquito, and the like): Ø from 4 to 10 mm and total length from 57.5 to 77 mm;
  • through bore drills (brazed and integral): Ø from 4 to 16 mm and total length from 57.5 to 77 mm;
  • dowel drills (brazed and integral): Ø from 5 to 16 mm and total length from 57.5 to 77 mm.

Its compact size makes it suitable for use in sharpening centers, but also directly by who uses the drills as it is simple and intuitive to use.
Each machine is supplied together with a practical dresser that regenerates the original profiles of the grinding wheel ensuring greater precision and durability.

Size

Weight

Spindle rotation speed

Spindle power

Mains voltage

Frequency

Voltage of the power circuit

Voltage of the control circuit

Installed power (engine + dresser)

Maximum amperage

Gallery

Video